HKXCAST一站式铝合金产品解决方案提供商邮箱:hkxcast@163.com
如何编写 ASTM E505 铸造验收标准:1-8 个严重程度、基于区域的标注、气体与收缩限制和要添加的条款。
高真空结构压铸合金牌号提供什么:延展性、T7 热处理、孔隙率规格和买家应检查的成本权衡。
CPK SPC 压铸要求:按特征进行索引、5 个子组(五个)、仪表限制和使供应商遵守图表的反应计划。
How copper raises strength in aluminum copper casting alloy grades and what corrosion costs you later, with ASTM B85 data for A380, A360 and B390.
What a first article inspection casting report must contain for cast and machined parts: ballooned characteristics, datums, sample size and PO terms.
A working die casting alloy selection matrix comparing strength, castability and cost across A380, A360, B390 and structural grades.
PPAP die casting guide: the 18 AIAG elements, five submission levels, the evidence that matters on cast parts, and clauses for your quality agreement.
See real cast aluminum thermal conductivity values for A380, A360, and AlSi10Mg heat sinks, plus fin design limits and cast vs extruded comparisons.
How to read a CMM inspection casting layout: datum frames, bonus tolerance, deviation columns and the characteristics that decide acceptance.
Compare recycled vs primary aluminum in die casting: chemistry shifts, carbon savings of about 95%, and how we control quality on a recycled charge.
An aluminum finish cost comparison for die castings: anodize, powder and e-coat indexes, film build, salt spray hours and which finish fits your part.
Learn to read a mill test report aluminum suppliers issue under EN 10204 3.1: certificate types, chemistry checks, red flags, and traceability best practice.